| It explains easily from the material to the completion of the bowl. When wood dries with undry , the distortion and the crack are caused.The material of the bowl is made in the cut end side and wood grain side.When the shaped positive one material is left, the crack is caused. It is a material of the bowl that leaks water. (With this, we have a bit of trouble. ).However, it doesn't crack mysteriously when work to shave the material rough is done and it dries and it dries fast. |
||
| 2.drawing line | 3. rough wood conversion |
|||
 |
There are various wounds in wood. |
 |
we do rough wood conversion by bandsaw. we process material by bandsaw'inside not to drop.。 |
|
| 4. rough scraping (outside) |
5. rough scraping (inside) |
|||
 |
It is rough scraping of outside. When dryness advances in juicy wood, the small crack is caused. To do rough scraping , wood's crack reduce and wood material dry faster. |
 |
rough scraped wood strain elliptically. to scrape away this strain is rough scraping . keeping material by scroll chuck, we scrape away inside. |
|
| 6. drying of rough scraped material |
7.finish（outside） |
|||
 |
For material's drying rough scraped material set inside room. |
 |
finish work must do in quite a little dry space. we finish bowl's outside surface by using scraper. |
|
| 8.finish（inside） |
- Bowls & Pattern |
|||
 |
it's bowl's inside surface finish . we stop torn grain by using dorm-shaped scraper . Both inside and outside finally We finish wood bowls by using sand paper. |
 |
When we make same shape bowls and dish , we use pattern. |
|
